CLaCUBooNC, CLUBooNC, CLUNC !
which stands for
Client for LaCie U-Boot NetConsole
in other words
Client to connect on the NetConsole of the U-Boot which is customized by LaCie
How it works ?
------------
CLUNC is a shell script which needs 2 components:
1) clunc-open which opens a session,
2) netcat (also called nc) which uses the session.
First, clunc-open broadcasts a magic packet (LUMP) in a loop.
When U-Boot receives a packet, it switches to the NetConsole mode.
A prompt is sent to clunc-open which stops sending LUMP.
It is now possible to send commands and receive answers via UDP.
Netcat is used to communicate with the NetConsole of U-Boot.
The network interface of the NAS must have an IP address which
is correctly routed on your network.
This address can be set via the LUMP with the option "-i".
The first LaCie NAS which is booting will be stopped by the LUMP.
It is possible to target a NAS by its MAC address with the option "-m".
Some NAS (or U-Boot versions) doesn't support this feature.
How to install ?
--------------
Download CLUNC with :
git clone
git://lacie-nas.org/clunc.gitIt includes a shell script named clunc which needs 2 components:
1) clunc-open is built by typing make.
2) netcat should be provided by your distribution.
If you want to move the script, you must move the tool clunc-open
in the same tree
or in a directory pointed by PATH.
How to use it ?
-------------
CLUNC must be launched before switching on the NAS.
It will wait until U-Boot is ready.
If an U-Boot is already in NetConsole mode, the session will be resumed.
Before resuming a session, CLUNC sends a break character (Ctrl+C) to U-Boot.
If a command was running, the break will abort it.
It can be used
as an interactive shell
or to send a batch of commands via the standard input
In case of batch commands, CLUNC will close itself after a inactivity time.
This timeout can be defined with option "-w". The default is 1 second.
Examples:
clunc -i 192.168.42.3
clunc -i 192.168.42.3 < uboot-commands
echo print | clunc -i 192.168.42.3
Pretty cool. With this tool you can get an u-boot prompt,
but without opening the NAS. From there, you can load a Linux kernel of your choice. At least, I think so.