OK Uncompressing Linux... done, booting the kernel. Linux version 2.6.33.1 (root@linux-fw1) (gcc version 4.2.0 20070413 (prerelease) (CodeSourcery Sourcery G++ Lite 2007q1-21)) #47 PREEMPT Sat May 15 22:43:07 CEST 2010 CPU: Feroceon [41069260] revision 0 (ARMv5TEJ), cr=a0053177 CPU: VIVT data cache, VIVT instruction cache Machine: Philips NAS SPD8020 CC Clearing invalid memory bank 0KB@0x00000000 Clearing invalid memory bank 0KB@0x00000000 Ignoring unrecognised tag 0x00000000 Ignoring unrecognised tag 0x00000000 Ignoring unrecognised tag 0x41000403 Memory policy: ECC disabled, Data cache writeback Built 1 zonelists in Zone order, mobility grouping off. Total pages: 4064 Kernel command line: console=ttyS0,115200 root=/dev/sda14 ro boardType=mv88F6082 productType=Aston reset=0 PID hash table entries: 64 (order: -4, 256 bytes) Dentry cache hash table entries: 2048 (order: 1, 8192 bytes) Inode-cache hash table entries: 1024 (order: 0, 4096 bytes) Memory: 8MB 8MB = 16MB total Memory: 12340KB available (3536K code, 203K data, 124K init, 0K highmem) SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Hierarchical RCU implementation. NR_IRQS:64 Calibrating delay loop... 218.72 BogoMIPS (lpj=1093632) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 Orion ID: MV88F6082-Rev-A1. TCLK=133333333. bio: create slab at 0 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Switching to clocksource orion_clocksource NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 512 (order: 0, 4096 bytes) TCP bind hash table entries: 512 (order: -1, 2048 bytes) TCP: Hash tables configured (established 512 bind 512) TCP reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. NetWinder Floating Point Emulator V0.97 (double precision) Installing knfsd (copyright (C) 1996 okir@monad.swb.de). msgmni has been set to 24 io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 3) is a 16550A console [ttyS0] enabled loop: module loaded Uniform Multi-Platform E-IDE driver ide-gd driver 1.18 sata_mv sata_mv.0: version 1.28 sata_mv sata_mv.0: slots 32 ports 1 scsi0 : sata_mv ata1: SATA max UDMA/133 irq 29 physmap platform flash device: 00040000 at f8100000 physmap-flash physmap-flash.0: map_probe failed MV-643xx 10/100/1000 ethernet driver version 1.4 mv643xx_eth smi: probed net eth0: port 0 with MAC address 00:d0:4b:85:8c:da ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver orion-ehci orion-ehci.0: Marvell Orion EHCI orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1 orion-ehci orion-ehci.0: irq 17, io mem 0xf1050000 orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver ums-datafab usbcore: registered new interface driver ums-freecom usbcore: registered new interface driver ums-jumpshot usbcore: registered new interface driver ums-sddr09 usbcore: registered new interface driver ums-sddr55 input: gpio-keys as /class/input/input0 i2c /dev entries driver rtc-ds1307: probe of 0-0068 failed with error -5 Registered led device: power:blue Registered led device: sata0:blue usbcore: registered new interface driver usbhid usbhid: USB HID core driver TCP cubic registered NET: Registered protocol family 17 VFP support v0.3: not present drivers/rtc/hctosys.c: unable to open rtc device (rtc0) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-7: SAMSUNG HD103UI, 1AA01111, max UDMA7 ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD103UI 1AA0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 > sda2 sd 0:0:0:0: [sda] Attached SCSI disk EXT3-fs (sda14): mounted filesystem with ordered data mode VFS: Mounted root (ext3 filesystem) readonly on device 8:14. Freeing init memory: 124K kjournald starting. Commit interval 5 seconds modprobe: FATAL: Could not load /lib/modules/2.6.33.1/modules.dep: No such file or directory modprobe: FATAL: Could not load /lib/modules/2.6.33.1/modules.dep: No such file or directory modprobe: FATAL: Could not load /lib/modules/2.6.33.1/modules.dep: No such file or directory INIT: version 2.88 booting Using makefile-style concurrent boot in runlevel S. CONFIG_SYSFS_DEPRECATED must not be selected! ... (warning). Booting will continue in 30 seconds but many things will be broken. ... (warning). Starting the hotplug events dispatcher: udevd. Synthesizing the initial hotplug events...done. Waiting for /dev to be fully populated...udevd[379]: unable to receive ctrl connection: Function not implemented udevd[379]: unable to receive ctrl connection: Function not implemented udevd[379]: unable to receive ctrl connection: Function not implemented . Starting periodic command scheduler: cron^C ^C^C^Z ata1: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6