Marvell>> setenv boot_disk1 "if disk ${kernel_addr} 0:C; then; else disk ${kernel_addr} 0:A; fi" setenv boot_disk1 "if disk ${kernel_addr} 0:C; then; else disk ${kernel_addr} 0:A; fi" Marvell>> printenv boot_disk1 printenv boot_disk1 boot_disk1=if disk 0x400000 0:C; then; else disk 0x400000 0:A; fi Marvell>> setenv bootargs console=ttyS0,115200 root=/dev/sda14 ro boardType=mv88F6082 productType=Aston reset=0 setenv bootargs console=ttyS0,115200 root=/dev/sda14 ro boardType=mv88F6082 productType=Aston reset=0 Marvell>> boot boot Waiting for LUMP (2) no lump receive; continuing Reset IDE: Marvell Serial ATA Adapter Integrated Sata device found Device 0: OK Model: SAMSUNG HD103UI Firm: 1AA01111 Ser#: S1PGJ1BQ701254 Type: Hard Disk Supports 48-bit addressing Capacity: 953869.7 MB = 931.5 GB (1953525168 x 512) Loading from IDE device 0, partition 12: Name: hda12 Type: U-Boot Image Name: Linux-3.0.0 Created: 2011-09-13 19:17:05 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2125720 Bytes = 2 MB Load Address: 00008000 Entry Point: 00008000 ## Booting image at 00400000 ... Image Name: Linux-3.0.0 Created: 2011-09-13 19:17:05 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2125720 Bytes = 2 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK